The Honcoop Highbanker Company

↑ top ↑

4 HP Honda Pressure Pump

4 Hp Honda OHV engine.
Low oil sensor
2 year warranty
2" inlet  -  1.5" discharge
Both male quick release fittings.

For ease of portability, the unit comes
bolted on a metal frame.
Completely machined of bilit aluminum (not cast).
Dead heading the pump at 3600RPM
holds pressure at 45 PSI.
Total head is 104ft. Flows 160 GPM.
Dry Wt: 45 lbs.

 Order Part #  GP2H$795 

↑ top ↑

Pressure Pump

This pressure pump will fit on a 5/8" threaded
shaft engine. Honda or Subaru.
2" inlet and 1.5" discharge.
Both male quick release fittings.
Completely machined of bilit aluminum (not cast).
Dead heading the pump at 3600RPM
holds pressure at 45 PSI.
Total head is 104ft.
Flows 160 GPM.

Click Here for Pressure Pump Assembly Guide

 Order Part #  GP2$325 

↑ top ↑

4.8HP Honda Engine
  with North Star Pressue Pump

Honda 4.8HP, low oil sensor, 2 year warranty, OHV. 2 inlet, 2 outlet. High pressure.
MAX GPH: 8120 gph. MAX Head: 214ft.
MAX Pressure: 94psi.
Aluminum Impellar, Cast Iron Volute,
Aluminum housing, silicon carbide seals.
Designed to push water long distances
or to great heights.

Self priming. Clean water.

68lbs.

 Order Part #  48PP$549 

↑ top ↑

GP2 Seal Kit

The replacement seals necessary for the
GP2 Pressure Pump. (Above)

 Order Part #  GP2SK$39.95 

↑ top ↑

2" Semi-Trash Pump

2" Semi-Trash OHV 4 Hp Honda engine.
11,100 gph
28' suction lift
76' max. total head
2" inlet & outlet
3/4" solid capacity
It has a Silicon Carbide mechanical seal.
A Silicon Carbide mechanical seal lasts many times longer than typical ceramic seals.

Dry Wt: 55 lbs.

 Order Part #  2P$495 

↑ top ↑

1" Pump

1.5 Hp Honda mini 4-Stroke Engine
1,980 gph
50 psi max.
115 max. total head
23' suction head
1" suction and discharge.
Includes 15' suction hose, strainer and couplers.

Dry wt. 17 lbs

 Order Part #  1P$395 

↑ top ↑

Pump Flow Comparison Chart

Pump Graph - GPM/Fire Nozzle
  0.5 0.625 0.75 0.875 1

GP2

35

30

27

21

16

Pump #1

35

30

23

16

9

Pump #2

28

24

20

13

8

Pump #3

32

29

22

14

8

  PSI Reading By Fire Nozzle Size

This pump flow comparison chart was done with the three most common manufacturer dredge pumps on the market. All had 4HP Honda OHV motors with readings taken at 3600 RPM. A 2"-12 suction hose, with a lift of 1ft was used on all the pumps, with a length of 25 of 1" layflat hose going to the fire nozzle. One pump had a 1" exit which was pipe fitted up to 1 to connect the layflat hose. All the rest of the pumps had 2" in, 1" out.


↑ top ↑

Please contact us for ordering at:

Toll Free: 888-988-2122
Phone: 989-743-4344

The Honcoop Highbanker Company

P.O. Box 1139
Owosso, MI 48867
Email: Honcoopgold@earthlink.net
We Accept:
Discover, Master Card, VISA, American Express

GPAA - LDMA